This A61L‑0001‑0072 unit is an embedded HMI/OIT operator‑interface screen that mounts in the front of Fanuc CNC cabinets, showing the MDI, program editing, alarm list, and status pages for the machine operator. The LCD version typically offers:
-
800×600 resolution with high brightness and high contrast, making text and graphics readable even in poor shop lighting.
-
A 170° viewing angle so the display remains visible from multiple positions around the machine.
-
Response time around 200 ms, sufficient for CNC text and simple graphics (not intended for high‑speed video).
Physically, it is built as an industrial‑grade, vibration‑and‑oil‑resistant display with a compact footprint that replicates the form of the original CRT, so no cabinet‑cutout changes are needed. The front‑bezel and screw‑holes match the legacy CRT, allowing a plug‑replace of the old tube with the new LCD module.
Because older Fanuc systems output non‑standard CRT‑style video signals, many customers use an industrial video converter (e.g., GBS‑8218‑type device) to convert the source signal into standard VGA or compatible analog RGB for the LCD, or they source pre‑converted A61L‑0001‑0072‑LCD kits that include the internal conversion electronics.
Key Specifications (from listing + known retrofit‑LCD behavior)
-
Size: 9‑inch diagonal LCD, same overall fit as original CRT.
-
Resolution: 800×600.
-
Viewing angle: ≈170°.
-
Brightness / contrast: High brightness and high contrast for shop‑floor readability.
-
Response time: ≈200 ms (typical for industrial text‑display LCDs).
-
Interface: Support for industrial video interfaces (e.g., 9‑pin‑style or converted VGA); actual pin‑out depends on the specific retrofit kit or OEM‑style module.
-
Weight: Lighter than the original CRT (retrofit LCDs are often under 10 lbs; precise weight varies by build).
-
Typical applications:
-
Machining centers, lathes, milling machines, grinders, and other Fanuc‑based CNC equipment using 6M, 6T, 6‑series, and compatible controls.
-
When to use this A61L‑0001‑0072
-
Replacing a failed or dim 9‑inch monochrome CRT on a Fanuc 6M/6T/6‑series machine.
-
Modernizing an older CNC by swapping CRT for a brighter, cooler‑running, power‑efficient LCD while keeping the same HMI layout.
-
Extending machine life in job shops, tool‑rooms, or production lines where the controller is still functional but the CRT is becoming unreliable.
If you tell me your exact Fanuc control model (e.g., 6M‑A, 6M‑B, 6T‑B, 6‑series variant), I can help you confirm whether this A61L‑0001‑0072 LCD module (or a specific retrofit‑LCD kit) is the correct match for your machine’s display location and signal type.
